PerkinElmer 200A Series, User Manual

Page: 167 / 172

Appendix
167
¾
Full scale
Used to determine the magnitude of output to such an external device as data processor
(chromato-integrator).
¾
GLP
The confidence function is used to check the status of instrument.
¾
Initial screen
After power on, the initial screen appears upon completion of initialization.
¾
Key lock
This protective function prevents an erroneous key input during operation of the
instrument.
¾
Lamp energy
Represents the intensity of lamp radiation. This value is used as an approximate value of
lamp service life.
¾
Lamp house
Equipped for holding the light source lamp. This part becomes extremely hot when the
lamp is lit. Be careful not to incur burns by touching it.
¾
Lamp-off in
The external contact signal can be input for turning off the light source lamp.
¾
Lamp turn-on count
Indicates the number of times the light source lamp has been turned on.
¾
Lamp turn-on cumulative time
Indicates a cumulative total time of lamp turn-on periods.
¾
Log book
Means the information containing records of instrument operating conditions.
¾
Marker in
The external contact signal can be input to provide marking on record.
¾
Offset
On output, a preset input signal value is added to an actually measured value. This function
is particularly useful when the baseline varies on the negative side.