Peri RCS P, Instructions For Assembly And Use, Page: 94 / 172

160 mm
5
0 m
m
94
C4 Suspension on the Structure
Attaching the Climbing Unit
Assembly
1. Fold up the pre-assembled Foldable
Covers and attach to the enclosure
using Fixation Bars.
2. Remove or secure all loose compo-
nents.
3. Install bolt with cotter pin on the
Enclosure Post as an attachment
point for the crane lifting gear.
4. Cut out enclosure panels in the area
of the crane lifting gear in order to
prevent any damage when lifting.
(Fig. C4.01)
5. Attach guide ropes to the climbing
enclosure.
6. Attach crane lifting gear to the bolt.
7. Align and lift the Climbing Unit.
(Fig. C4.02)
Fig. C4.01
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration