Peri RCS P, Instructions For Assembly And Use, Page: 109 / 172

44.6
44.1
44.4
44
44.2
45.1
45
45
109
D1 Suspension and Anchoring
Assembly of the Climbing Shoe RCS
For operation of the Climbing Shoe,
see Section D2.
Components
44
Climbing Shoe RCS
44.1
Climbing Pawl
45
Slab Shoe RCS
45.1 Locking Pin
Assembly
1. Secure Climbing Shoe RCS (44) on
bolts for connecting the Climbing
Device (44.6) against falling to the
ground.
2. Close guiding skids.
3. As a rule, lock the climbing pawl
(44.1) with the pawl lock (44.4).
4. Insert the Climbing Shoe into the
Slab Shoe RCS (45) or the Stopend
Slab Shoe RCS.
5. Insert the locking pin (45.1) or (48.1)
through the lateral cheeks of the
Wall Shoe and Climbing Shoe and
secure with cotter pin.
6. Open guiding skids (44.2) on the
Climbing Shoe to allow easier inser-
tion of the Climbing Rail.
(Fig. D1.08 + D1.08a)
– Are all locking pins on the guide
skids fully inserted and secured?
– Are all locking pins of the Slab Shoes
/ Stopend Slab Shoes secured with
cotter pins?
Fig. D1.08
Fig. D1.08a
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration