Peri RCS P, Instructions For Assembly And Use, Page: 86 / 172

92 / 94
93 / 95
1
15
7
7
7
1
31
Ø 26 mm M24 x 130 (94) M24-8 (95)
Ø 20 mm M20 x 120 (92) M20-8 (93)
99
86
C3 Assembly of the Enclosure
Mounting the Girder VT 20
Use the Adapter VT20 / RCS-P when
mounting the Girder VT 20 as an Enclo-
sure Beam. Use the dimensions speci-
fied in the site-specific assembly draw-
ings!
Components
1 Climbing Rail RCS
7 Girder VT 20
15 Adapter VT20 / RCS-P
92 Bolt ISO 4014 M20 x 120-8.8
93 Hex. Nut ISO 7042 M20-8
94 Bolt ISO 4014 M24 x 130-8.8
95 Hex. Nut ISO 7042 M24-8
99 TSS-Torx 6 x 60
Assembly
1. Align the Climbing Rails according to
the axial dimension.
2. Insert Adapter VT 20 / RCS-P (15)
with the support above into the
Climbing Rail or Enclosure Post.
2. Insert bolts (92 / 94) through the
holes in the Climbing Rail or Enclo-
sure Post and Adapter (15). Secure
bolts with nuts (93 / 95). (Fig.
C3.04a)
3. Align Girder VT 20 on the Adapter
(15) accordingly and secure with 2
Torx screws 6 x 60 (99) per Adapter.
Use the marked screw holes.
(Fig. C3.04b)
Fig. C3.04
Fig. C3.04a
Fig. C3.04b
Table C2.01
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration
Specified bolt connection
Rail Drilled hole Bolt Nut
Climbing Rail
Enclosure Post