Peri RCS P, Instructions For Assembly And Use, Page: 20 / 172

60.1
60
60.4
60.3
60.3
60.4
60.4
60.3
60.6
60.5
60.2
20
A2 Climbing Device and Hydraulics
Climbing Device and Hydraulics
This section provides basic information
about the Climbing Device and Hydraulic
Pump. Further information is provided
in the following sections, as well as in
the separate Instructions for Use for
the RCS Climbing Device and hydraulics.
Climbing Device RCS 50
The Climbing Device RCS 50 is used to
gradually climb the climbing enclosure.
After the climbing procedure is com-
pleted, the climbing enclosure must be
placed on the climbing pawls of the
Climbing Shoes ensuring that the load
is fully supported. The Climbing Device
must be load-free.
(Fig. A2.01 + A2.02)
Main components
60 Climbing Device RCS 50 1*
60.1 Piston head with claw and roller
60.2 Cylinder base
60.3 Return from the piston-rod side
with the hydraulic quick coupler
(nipple) left + right with protec-
tive cover
60.4 Inflow to the piston base with
the hydraulic quick coupler
(bushing) left + right with pro-
tectice cover
60.5 Cylinder reposition device
(spring-loaded)
60.6 Locking lever (spring-loaded)
The quick couplers on the Climbing
Device and Hydraulic Pump are inter-
changeable. Feed line and return line
cannot be mixed up.
1* safety components.
Fig. A2.01
Fig. A2.02
To prevent the quick couplers from col-
liding with the platforms or other parts
of the climbing protection panel when
climbing, it is possible to arrange the
couplings vertically using angle pieces.
 Contact PERI!
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration