manualshive.com logo in svg

Peri RCS P, Instructions For Assembly And Use, Page: 24 / 172

Share
Download
Peri RCS P Instructions For Assembly And Use Download Page 24

24

A4  Operating Sequence

Step 1
Climbing enclosure is in position.
Close cover flaps.
Concrete the columns.

Step 2
Erect slab formwork with stopends.
Install leading anchor with the aid of 
the Slab Anchor Template.

Fig. A4.01

Fig. A4.02

Operating Sequence

The difference in the operating 
 sequence of Versions 1 - 3 and 4 is 
 primarily due to when the slab is 
struck. 

All versions can be climbed using the 
hydraulic self-climbing device or by 
crane.

Version 1 - 3

Climbing enclosure with working plat-
form.

The slab formwork is in the way for the 
climbing procedure. PERI recommends 
a slab formwork system, e.g. 
SKYDECK, which allows early striking. 
The example shows the operating 
 sequence with SKYDECK Slab Form-
work.

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

Summary of Contents for RCS P













































































































































































Reviews:

No comments