Peri RCS P, Instructions For Assembly And Use, Page: 69 / 172

8
8 4.3
4
4.1
4.2
Ø 21
Ø 21
Ø 26
Ø 26
69
Assembly of the Attachment
Points
Version 1
with Crossbar RCS 69:
The Crane Eye BR-2 2.5 t (7) is fixed to
the Climbing Rail RCS (2) with the
Spacer M24 (4).
Components
4 Spacer M24-82
4.1 Spacer Tube Ø33.7×4…82
4.2 Bolt ISO 4014 M24x130-8.8
4.3 Nut ISO 7042 M24-8
8 Crane Eye BR-2 2.5 t
Assembly
1. Position spacer tube Ø33.7 (4.1) of
the Spacer M24 together with Crane
Eye BR 2.5t (8) on the topmost hole
Ø26 of the Climbing Rail (2) with the
help of a hammer.
2. Insert bolt M24×130 (4.2) through
the holes Ø26 of the Climbing Rail
and through the spacer tube.
3. Attach self-locking nut M24-8
(SW36) to the bolt and tighten.
Has the Nut been tightened?
Permissible load per Crane Eye BR-2
2.5 t: max. 25 kN.
For moving heavy climbing units, use
Lifting Beam 9 t. Use a Spacer as an
attachment point.
Follow Instructions for Use at all times!
Fig. C1.03
Fig. C1.03a
C1 Pre-Assembly of Brackets
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration