Peri RCS P Instructions For Assembly And Use Download Page 71

Page: 71 / 172

1.2

1.2 / 1.4

24 + 26

Ø 21

Ø 26

C1 Pre-Assembly of Brackets

Assembly of Climbing Rail
Connector RCS 73

Enclosure Post Version 3:

The Climbing Rail RCS 748 (1.2) is
extended with a Climbing Rail RCS 148
(1.4) or 248 (1.3). For connecting the
Climbing Rails, mount a Climbing Rail
Connector RCS 73 (17).

Components

1.2

Climbing Rail RCS 748

1.3

Climbing Rail RCS 248

1.4

Climbing Rail RCS 148

Climbing Rail Connector RCS 73

Fitting Pin Ø 21 x 120

Cotter Pin 4/1

Assembly

1. Remove or re-position Spacers in

the Climbing Rail that are in the way.
See "Preparing the Climbing Rails" on
page 66.

2. Insert Climbing Rail Connector (17)

into the Climbing Rail RCS 748 (1.2)
and connect with 2x fitting pins Ø 21
(24) in holes Ø 21.

3. Insert short Climbing Rail RCS (1.3 /

1.4) into the Climbing Rail Connector
and connect with 2x fitting pins Ø 21
in holes Ø 21.

4. Secure all fitting pins with cotter

pins (26).

Fig. C1.05

Fig. C1.05a

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

Summary of Contents for RCS P













































































































































































Search results

Summary of Contents for RCS P

Reviews:

Peri RCS P, Instructions For Assembly And Use, Page: 71 / 172

Search results

Summary of Contents for RCS P

Reviews: