Peri RCS P, Instructions For Assembly And Use, Page: 90 / 172

20
20
20°
20°
20
20
18
19
14
14
99
99
20
20
18
14
14
14
b
b
10 mm
10 mm
90
C3 Assembly of the Enclosure
Mounting the Protection Edges
Secure the protection edges to the
Enclosure Beams according to the
site-specific assembly drawings.
For mounting the protection edges, the
Enclosure Beams are shortened by ap-
prox. 20 mm.
Components
14 Enclosure Beam (timber)
18 Enclosure (multi-layer plywood
sheeting)
19 Enclosure (trapezoidal metal
sheeting)
20 Protection Edge
99 TSS-Torx 6 x 60
Assembly
1. Cut solid wood boards 30 mm thick
to match dimension b. Dimension b
depends on the thickness of the
Enclosure Beam and the enclosure
materials used. Chamfer protection
edges on one side above and below
approx. 10 mm.
2. Fix the protection edges (20) to the
front side of the Enclosure Beam (14)
with screws 6 x 60 (99). Use 2
screws per Enclosure Beam.
(Fig. C3.08 - C3.08c)
Fig. C3.08
Fig. C3.08a
Fig. C3.08b
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration