Peri RCS P, Instructions For Assembly And Use, Page: 50 / 172

1
13
13.1
92 + 93
18
14
3
a
b
h
50
B2 Planning the Units
Enclosure
Requirements for the Enclosure
Beam :
Timbers (14) made of Solid Wood C24
(Coniferous Wood S10).
Dimensions w/h = 12/10, 12/12, 14/10,
14/14, 15/7.5 cm or 15/15
Spacing a and span according to static
proof. Mount the timbers on the outer
side.
Fixing the Enclosure Beams:
Attach the Timber Fixation RCS (13) to
the Enclosure Post RCS (1) using
Eyebolts (13.1) and to the Climbing Rail
with Bolts (92 / 94) according to the
hole diameter respectively.
Spacers (3) can be used.
Hole Ø 26:
bolt ISO 4014-M24 x 130-8.8 (94)
with hex. nut ISO 7042 M24-8 (95)
Hole Ø 21:
bolt ISO 4014 M20 x 120-8.8 (92)
with hex. nut ISO 7042 M20-8 (93)
Attach Enclosure Beam (14) to the
Timber Fixation RCS (13) using bolt
ISO 4017:
for h ≤ 120 mm: M12 x 140-8.8 (2x)
for h > 120 mm: M12 x 240-8.8 (2x)
hex. nut ISO 4032 M12-8 (2x)
washer ISO 7093 200HV, A12 (2x).
(Fig. B2.13 + B2.14 + B2.15)
Components
1 Enclosure Post
3 Spacer M20-82
13 Timber Fixation RCS 12/20
13.1 Eyebolt M20
14 Enclosure Beam (timber)
18 Enclosure (multi-layer plywood
sheeting)
19 Enclosure (trapezoidal metal
sheeting)
23 Plate Connector Ø 48/12 mm
90 Bolt ISO 4017 M12 x 140-8.8
91 Bolt ISO 4017 M12 x 240-8.8
92 Bolt ISO 4014 M20 x 120-8.8
93 Hex. Nut ISO 7042 M20-8
94 Bolt ISO 4014 M24 x 130-8.8
95 Hex. Nut ISO 7042 M24-8
96 Hex. Nut ISO 4032 M12-8
97 Washer ISO 7093 200HV, A12
98 TSS-Torx 6 x 80
99 TSS-Torx 6 x 60
Fig. B2.13
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration