Location Service configuration task list
612
SmartWare Software Configuration Guide
51 • Location Service
Mode:
Call outbound
Mode:
Call outbound
Mode:
Call outbound
Call inbound face
The call inbound face is used to configure call properties for incoming calls.
Mode:
Identity
Mode:
Call inbound
Step
Command
Purpose
1
[
node
](callout)#proxy
<index>
down
<posi-
tions>
or
[
node
](callout)#proxy
<index>
up
<posi-
tions>
If multiple proxies are configured the entry at the
index can be moved in the proxy list up or down
the number of positions given in the command.
Step
Command
Purpose
1
[
node
](callout)#no proxy [
<index>
]
Removes the proxy entry at the index or remove all
proxy entries if no index is given.
Step
Command
Purpose
1
[
node
](callout)#proxy none
Removes all proxy entries and disables explicitly
the use of a proxy.
Step
Command
Purpose
1
[
node
](identity)[name]# [no] call inbound
Adds a new face to the identity. The no form of the
command removes an existing face with all content
in it.
Step
Command
Purpose
1
[
node
](callin)[name]# [no] use profile
(sip|tone-set|voip)
<profile>
Adds or removes a profile to use if an incoming
call destines this identity.