![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-series/smartnode-series_software-configuration-manual_4048643608.webp)
Location Service configuration task list
608
SmartWare Software Configuration Guide
51 • Location Service
Registration outbound face
The registration outbound face is used to register an identity on an external registrar. Then, the registrar for-
wards calls from the registered identity to your identity.
Mode:
Identity
Mode:
Registration outbound
Mode:
Registration outbound
Mode:
Registration outbound
Mode:
Registration outbound
Step
Command
Purpose
1
[
node
](identity)[name]# [no] registration
outbound
Adds a new face to the identity. The no form of the
command removes an existing face with all content
in it.
Step
Command
Purpose
1
[
node
](regout)# [no] register [auto|none]
Enables registration with auto or disables registra-
tion explicitly with none.
Step
Command
Purpose
1
[
node
](regout)# [no] registrar
<host>
[
<port>
]
Configures the address of the registrar to send
your register requests. When no registrar is config-
ured, the register requests are sent to the first
domain entry in the location-service.
Step
Command
Purpose
1
[
node
](regout)# [no] lifetime
<seconds>
Configures the desired lifetime of the registration.
When no lifetime is configured the desired lifetime
is set to 3600 seconds.
Step
Command
Purpose
1
[
node
](regout)# [no] retry-timeout (on-cli-
ent-error|on-sysstem-error|on-server-
error)
<seconds>
Configures the time to wait after a failed registra-
tion according to three different error categories.
After this time we begin to register from new. If no
retry-timeout is configured the retry-timeout is set to
10 seconds.