![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-series/smartnode-series_software-configuration-manual_4048643540.webp)
Other FXO port parameters
540
SmartWare Software Configuration Guide
44 • FXO port configuration
Mode:
Configure
Step
Command
Purpose
1
node
(config)#port fxo
slot port
Enter FXO port configuration mode
2
optional
node
(prt-fxo)[
slot
/
port
]#caller-id for-
mat { bell | etsi }
Specifies which line protocol is used for caller-id
transmission. Use bell for US / Canada, etsi for
Europe.
If caller-id is not enabled or wrong configured,
detection of caller-id is not possible. Default: etsi
3
optional
node
(prt-fxo) [
slot
/
port
]#flash-hook
duration
duration
Specifies for what time the SmartNode should go
on-hook to signal flash-hook to the CO. Default of
duration
is 200ms, for US and Canada try 350ms
or higher.