32
SmartWare Software Configuration Guide
About this guide
•
Chapter 19,
"ISDN configuration"
on page 215 describes the configuration of the Q.921 and Q.931 proto-
col and how to bind the ISDN protocol to an application.
•
Chapter 20,
"RBS configuration"
on page 223 describes the configuration of the Robbed Bit Signaling
(RBS) protocol and how to bind it to the Call Control application.
•
Chapter 37,
"RBS interface configuration"
on page 421 provides an overview of RBS interfaces, and the
tasks involved in their configuration.
•
Chapter 21,
"DSL Port Configuration"
on page 228 provides an overview of the the DSL ports (ADSL and
G.SHDSL), their characteristics and the tasks involved in the configuration.
•
Chapter 22,
"Basic IP routing configuration"
on page 233 provides an overview of IP routing and describes
the tasks involved in configuring static IP routing in SmartWare.
•
Chapter 23,
"RIP configuration"
on page 240 provides an overview of the
routing information protocol
(RIP) and describes the tasks involved in configuring RIP features within SmartWare.
•
Chapter 24,
"Access control list configuration"
on page 251 provides an overview of IP access control lists
and describes the tasks involved in their configuration through SmartWare.
•
Chapter 25,
"SNMP configuration"
on page 265 on page 238 provides overview information about the
simple network management protocol
(SNMP) and describes the tasks used to configure those of its features
supported by SmartWare.
•
Chapter 26,
"SNTP client configuration"
on page 280 describes how to configure a
simple network time pro-
tocol
(SNTP) client.
•
Chapter 27,
"DHCP configuration"
on page 290 provides an overview of the
dynamic host configuration
control protocol
(DHCP) and describes the tasks involved in its configuration.
•
Chapter 28,
"DNS configuration"
on page 302 describes how to configure the
domain name system
(DNS) component.
•
Chapter 29,
"DynDNS configuration"
on page 306 describes configuring the
dynamic DNS
(DynDNS) service.
•
Chapter 30,
"PPP configuration"
on page 311 describes how to configure the
point-to-point protocol
over
different link layers.
•
Chapter 31,
"CS context overview"
on page 337 gives an overview of SmartWare
circuit-switching
(CS) con-
text and its associated components and describes the tasks involved in its configuration.
•
Chapter 32,
"VPN configuration"
on page 360 describes how to configure the VPN connections between
two SmartNodes or between a SmartNode and a third-party device.
•
Chapter 33,
"CS interface configuration"
on page 379 gives an overview of interfaces in the CS context and
describes the tasks involved its configuration.
•
Chapter 34,
"ISDN interface configuration"
on page 388 provides an overview of ISDN interfaces, and the
tasks involved in their configuration.
•
Chapter 35,
"FXS interface configuration"
on page 402 provides an overview of FXS interfaces, and the
tasks involved their configuration.