![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-series/smartnode-series_software-configuration-manual_4048643490.webp)
Call router configuration task list
490
SmartWare Software Configuration Guide
40 • Call router configuration
not the egress interface propagates the address-complete indication depends on the interface configuration
(see below).
The next table shows the different digit-collection terminating-character configurations and their effect on a T-
terminated route when the terminating-character is received.
The command
digit-collection full-match
has been introduced. The syntax is:
digit-collection full-match [append-terminating-char] [set-address-complete-indication]
This command configures what action(s) shall be performed when a dollar-($)-terminated rule is selected in a
called-e164 routing-table. We call such an entry a fully specified number entry. The
append-terminating-char
action appends the terminating-character; while the
set-address-complete-indication
action sets the address-
complete indication. Whether or not the egress interface propagates the address-complete indication depends
on the interface configuration (see below).
Egress Interface
On the egress interface (ISDN, H.323) the
address-complete-indication emit <type>
command configures
how the internal representation of the address-complete indication shall be mapped to the representation of the
signaling-protocol.
Digit Collection Terminating-Char
Configuration
Ingress Properties
Egress Properties
(Result of call-routing)
Terminating-
Char
append-
terminating-
char
set-
address-
complete-
indication
called-e164 Address-
Complete
Indication
called-e164 Address-
Complete
Indication
No
no
no
123#
False
123#
false
true
true
yes
false
false
true
true
yes
no
false
false
true
true
yes
false
false
true
true
Yes
no
no
false
123
false
true
true
yes
false
true
true
true
yes
no
false
123#
false
true
true
yes
false
true
true
true