Activating CS context configuration
348
SmartWare Software Configuration Guide
31 • CS context overview
Mode:
Context CS
Example:
Enable CS Context
The following example shows how to enable the call router debug monitor and how to enable the CS context.
It also shows the output from the call router debug monitor.
node(cfg)#show call-router config detail 5
Table switch/TAB-ISDN-SERVICE:
Key Value Function Dest-Type Dest-Name
itc -
-------------------------------------------------------------------------------
unrestricted-digital - - dest-interface IF-LOCAL-BA
default - - dest-table TAB-DEST-A
Table switch/TAB-DEST-A:
Key Value Function Dest-Type Dest-Name
called-e164 -
-------------------------------------------------------------------------------
0 - MAP-CAC-ORANGE dest-interface IF-LOCAL-BA
00 - MAP-CLI-MELON dest-interface IF-NODE-C
07[4-6] - MAP-CAC-APPLE dest-interface IF-LOCAL-BA
0336652... - - dest-interface IF-NODE-B
default - - dest-interface IF-LOCAL-BA
Table switch/CAC-APPLE:
Key Value Function Dest-Type Dest-Name
called-e164 called-e164
-------------------------------------------------------------------------------
(.%) 1055\1 - - -
...
node(cfg)#debug call-router
node(cfg)#context cs
node(ctx-cs)[switch]#no shutdown
Step
Command
Purpose
1
node
(ctx-cs)[switch]#show call-router config detail
level
Show the CS context configuration.
Level
could be 1..5. Level 1 shows less,
level 5 shows all information.
2
node
(ctx-cs)[switch]#debug call-router detail
level
Enable the call-router debug monitor.
Level
could be 1..5. Level 1 only logs
errors, level 5 shows all relevant infor-
mation to track calls through routing
tables.
3
node
(ctx-cs)[switch]#no shutdown
Enable the CS context, checks the inter-
face and call router configuration
4
node
(ctx-cs)[switch]#show call-router status detail
level
Show the actual state of the call router.
This includes all configured tables as
they were read-in from the configura-
tion.