Call router configuration task list
475
SmartWare Software Configuration Guide
40 • Call router configuration
node(rt-tab)[HOLIDAY~]#route default dest-interface IF-VOIP
Deleting routing tables
To remove individual routing tables you can use the
no
form of the
routing table
command. Alternatively
you can remove specific entries of a routing table by entering the routing table configuration mode and use the
no
form of the
route
command.
Procedure:
To delete an entry from a routing table
Mode:
Context CS
Example:
Remove entries from a routing table
The running-config shows the following table:
routing-table called-e164 MY-TABLE
route 10 dest-interface IF1
route 11 dest-interface IF2
route 12 dest-interface IF3
route default dest-interface IF4
To remove the first two entries from the table enter the following commands:
node(cfg)#context cs
node(ctx-cs)[switch]#routing-table MY-TABLE
node(rt-tab)[MY-TABLE]#no route 10
node(rt-tab)[MY-TABLE]#no route 11
The resulting running-config is:
routing-table called-e164 MY-TABLE
route 12 dest-interface IF3
route default dest-interface IF4
Procedure:
To delete an entire routing table
Step
Command
Purpose
1
node
(ctx-cs)[
switch
]#
routing-table
table-name
Enter the routing table from which you want to remove an
entry.
Note:
You do not have to enter the type of the table when
just entering it. The type must only be specified when creating
a table.
2
node
(rt-tab)[
table-name
]#
no route
key
Remove the entry with the specified
key
.
3
Repeat Step 2 to remove additional entries.