RIP configuration task list
245
SmartWare Software Configuration Guide
23 • RIP configuration
The following example shows how to enable RIP learn host and default on IP interface
wan
.
node(cfg)#context ip router
node(ctx-ip)[router]#interface wan
node(if-ip)[wan]#rip learn host
node(if-ip)[wan]#rip learn default
Enabling an interface to receive RIP
This procedure describes how to enable receive RIP on an IP interface
Mode:
Interface
Example:
Enables an interface to receive RIP
The following example shows how to enable receive RIP for IP interface
lan
.
node(cfg)#context ip router
node(ctx-ip)[router]#interface lan
node(if-ip)[lan]#rip listen
Enabling RIP announcing
The RIP protocol supports announcing features, which are used to proclaim specific routing information to
other elements in a network. The RIP announcing command is used for this purpose and offers options for
•
default
—for RIP default routes,
•
host
—for IP host routes,
•
self-as-default
—for self as RIP default routes and
•
static
—for static IP routes.
Depending on the RIP announcing method the last option for the command in 3 must be explicitly selected. It
is possible to have more than one RIP announcing method enabled concurrently.
This procedure describes how to enable RIP announcing on an interface
Mode:
Interface
Example:
Enabling RIP announcing
The following example shows how to enable the RIP default routes and IP host routes RIP announcing
method on IP interface
wan
.
Step
Command
Purpose
1
node
(if-ip)[
name
]#rip listen
Enables receive RIP on IP interface
name
Step
Command
Purpose
1
node
(if-ip)[
name
]#rip announce {default | host | self-
as-default | static}
Selects the RIP announcing
method on interface
name
