Tone configuration task list
529
SmartWare Software Configuration Guide
42 • Tone configuration
Mode:
Interface
Example:
Assign tone-set profiles to an ISDN interface
The example shows how to use the SWISS tone-set for the CS context, and use the USA tone-set for an indi-
vidual interface.
node(cfg)#context cs
node(ctx-cs)[switch]#interface isdn bri0
node(if-isdn)[bri0]#use profile tone-set USA
Show call-progress-tone and tone-set profiles
Use the show commands to display the call-progress-tone profiles as well as the tone-set profiles.
Procedure:
To show call-progress-tone profiles
Mode:
Administrator execution
Example:
Show call-progress-tone profile
The following example shows how to display the call-progress-tone profiles.
node#show profile call-progress-tone belgianSpec
Profiles:
---------
belgianSpec:
Play 330ms (950Hz at -4dB)
Play 330ms (1400Hz at -4dB)
Play 330ms (1800Hz at -4dB)
Pause 100ms
Procedure:
To show tone-set profiles
Mode:
Administrator execution
Example:
Show tone-set profile
Step
Command
Purpose
1
node
(ctx-cs)[switch]#interface
if-type
if-
name
Enter interface configuration mode.
2
node
(if-
type
)[
if-name
]#use profile tone-
set
name
Assign a user defined tone-set profile to an
interface.
Step
Command
Purpose
1
node
#show profile call-progress-tone
[
name
]
Display all call-progress-tone profiles or a spe-
cific with name
name
Step
Command
Purpose
1
node
#show profile tone-set [
name
]
Display all tone-set profiles or a specific with
name
name