Parker FG-K17401-KW, Instruction Manual

Page: 51 / 95

MA-K17510-KW LinerSCAN manual ISSUE P.doc Page 50 of 93
5.2.6 Configuration Tab
The “Configuration” screen (F3) allows one or more sensor parameters to be changed. Sensors can
have the same parameters by selecting “All”.
Engine Configuration:
1. Where data is stored on the computer and it is not recommended that this is changed.
2. LinerSCAN software 5.3 is backward compatible with older versions of LinerSCAN sensors and
hardware. This is not applicable to 5
th
Generation LinerSCAN.
3. LinerSCAN software 5.3 is backward compatible with older versions of LinerSCAN sensors and
hardware. This is not applicable to 5
th
Generation LinerSCAN.
4. IMO number remains with the vessel and is not changeable without re-installing the LinerSCAN
software. This ensures data can be traced even if the vessel owner/name changes.
5. The chart (F5) can be exported as an image, this selects the format. It is not recommended that this is
changed.
6. Cylinders on the engine. It is not recommended that this is changed.
7. Vessel Name
8. Update or cancel changes made to this section
1 2
2 3 4 5 6 8
11
7
9
9
12
10
10 10 10