STEP 3:
INSTALL DRIVE ASSEMBLY
• Reinstall nozzle cap with
screws (2).
• Install new snap ring under cap.
• Place assembly in body.
• Push assembly until flush.
• Using tool push down in snap
ring slots (2) until it clicks in.
STEP 2:
INSTALL NEW NOZZLE
• Remove screws (2) on top of
nozzle cap.
• Pull off nozzle cap.
• Snap in correct nozzle.
(see Performance Chart).
• To remove nozzle, pull out
using snap ring tool or screwdriver.
D50 SERIES
Full Circle Golf Rotor
NOZZLE INSTALLATION GUIDE
STEP 1:
REMOVE DRIVE ASSEMBLY
Help Desk:
888-484-3776
support.weathermatic.com
99903375_revA