Parker Coral Sea, Owner'S Manual

Page: 48 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 12 of 129
Key:
CH0: Analog CH0 (PT-1004). Illuminates if the input is enabled and the connected sensor is healthy
CH1: Analog CH1 (PT-1005). Illuminates if the input is enabled and the connected sensor is healthy
CH2: Analog CH2 (PT-1006). Illuminates if the input is enabled and the connected sensor is healthy
CH3: Analog CH3 (TDS-1001). Illuminates if the input is enabled and the connected sensor is healthy
CH4: Displays the current voltage being received from the brine flow sensor, start the system in
manual mode while in commissioning mode to watch the voltage readings from this sensor to
confirm if the sensor is functioning correctly. The sensor has a 4 to 20 GPM span over 0 to 10V
hence an 8GPM flow would result in approximately a 4.8 to 5.0v reading, and a 16 GPM flow
would result in a near 8.5 to 9.0v reading.
CH5: Displays the current voltage being received from the Product flow sensor, start the system in
manual mode while in commissioning mode to watch the voltage readings from this sensor to
confirm if the sensor is functioning correctly. The sensor has a 0 to 5 GPM span over 0 to 10V
hence a 2.5GPM flow would result in approximately a 4.8 to 5.0v reading, and a 4.2 GPM flow
would result in a near 8.5 to 9.0v reading.
LP Switch: Low Pressure Switch, Illuminates when the switch contact closes
HP Switch: High Pressure Switch, Illuminates when the switch contact closes
E-Stop: E-Stop Active, Illuminates whenever an E-Stop condition is present (inc. remotely)
Press on the ‘More’ button at the top right corner of the screen.
This will take you to the second of four commissioning screens. The second screen as shown below
details all of the outputs currently being powered by the controller. This screen can be used to check for
proper external equipment functionality. A grey indicator as seen extensively below signifies that an
output is currently turned off, when the indicator is illuminated this implies the output is powered and
the connected external device should be active.
Press Here
Coral Sea Owner's Manual