Parker Coral Sea, Owner'S Manual

Page: 112 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 76 of 129
Pressing ‘Select’ will highlight the first alarm item.
Pressing ‘Move Up’ will scroll up through the alarm list
Pressing ‘Move Down’ will scroll down through the alarm list
Pressing ‘Accept’ will clear the listed alarm notifications.
Pressing ‘Back’ will exit the alarm list. Please note the ‘Back’ button is only active if no faults or errors
are currently displayed, if errors or faults are displayed, press ‘Accept’ to exit this screen.
When a system performance fault is detected the system fault indicator will blink at 0.5 second
intervals, the general alarm contact will not change state in these situations. The system fault indicator
will continue to blink until the fault is accepted by the operator; this can be done by pressing the
‘Accept’ button in the performance message center or by pressing ‘Ignore’ in the preceding
performance warning screen. Once a fault has been accepted the system fault indicator will stop
blinking, but a log of the fault is kept within the performance message center. This list of potential
problems can be viewed at any time by manually navigating back to the performance message center
(See Menu Navigation)
Coral Sea Owner's Manual