Parker Coral Sea, Owner'S Manual

Page: 128 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 92 of 129
13.6 Accessing High Pressure Pump Hour Meter
To view the number of hours endured by the high pressure pump, press on the arrow next to the text
‘HP Pump Hour Meter’ as shown below:
Pressing this button will lead you to ‘HP Pump Hour Meter’ screen as seen above:
From this ‘HP Pump Hour Meter’ screen it is possible to view the total amount of running hours endured
by the high pressure pump. It is also possible to reset this number after servicing has been completed to
prevent continuous system performance warning messages from being called during operation.
Resetting of this accumulated hour meter can only be done once the counter has reached 8000hrs for
Danfoss Pumps/2000hrs for CAT Pumps or over, until this time, the ‘Reset’ button is not active.
Pressing the arrow in the top left hand corner of the screen will return you to the ‘System Menu’ screen.
Press Here To
Reset Meter
Press Here To
Go Back
Coral Sea Owner's Manual