Parker Coral Sea, Owner'S Manual

Page: 95 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 59 of 129
8. Automatic Shut down Operation:
At any time in the automatic start up process the system can be shut down by pressing the ‘Auto-Stop’
button, pressing this button results in a controlled shutdown of the system. This controlled shut down
can take up to 45 seconds to complete depending on where the system was in its automatic start up
routine at the time the ‘Auto-Stop’ button was pressed.
Once pressed the ‘Auto-Stop’ button will begin to flash. This response is to inform you a system
shutdown is now in progress. Once the system shut down is completed the ‘System Auto Stop’ light will
remain steadily illuminated.
If a system fault is detected during shutdown the controller will display a system fault notification screen
detailing the problem (See System Critical Error Messages), as shown below:
Pressing ‘Show Log’ will open the system fault log window where details concerning the detected fault
are given as shown below:
Press here to
review fault
Coral Sea Owner's Manual