Parker Coral Sea, Owner'S Manual

Page: 147 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 111 of 129
Once the correct password has been entered, the control system will pass you on to the accessory
enable/disable screen, form this screen it is possible to activate or de-activate your selected accessory.
The text within the control button reflects the accessories current state. To change the state press on
the control button, as you do so the text within the control button will change to show the accessories
new state as shown below:
Some accessory enable/disable control screens also offer additional abilities as seen here. These
additional abilities relate directly to the functionality of accessory itself, as seen in this example you are
given the option to test if the connected UV sterilizer system is actually functioning correctly or not by
being given the ability to manually force the UV system into an ‘ON’ state. Please note however that
these additional function buttons are only active once you have enabled the accessory. If you accidently
leave the accessory in the ‘ON’ state, it will automatically be switched off when you exit this screen.
Once you have changed the accessory state to your requirements, press ‘Save Setting To EEPROM ’
button in the lower right corner of the screen to store these changes into system EEPROM. Once the
‘Save Setting TO EEPROM’ button has been pressed the system will advise you that these changes are
being stored, once the store is complete the system will return to the main splash screen as shown on
the next page:
Press to change state
Press to
save
changes
Press for additional
accessory functions
Coral Sea Owner's Manual