4 Operation
980-001-0210K
NetPath 100 User’s Manual - Installation Guide
4-29
November 2000
3. Top Statistics - Selection determines whether the Top IP Traffic collection will be
based on the top User “Talker” and “Listener,” or the top “Conversation” Pair in
each direction.
Top Talker/Listeners are determined by separately tracking, in the send and re-
ceive direction, the IP address and the total traffic of the most prolific transmitters
and receivers of IP traffic within the measurement interval.
Top Conversation Pairs are determined by separately tracking, in send and receive
direction, IP address pairs of each host/client conversation and the total traffic sent
by each pair during the measurement interval.
Both Top Conversation Pair and Talker/Listener are calculated across the aggre-
gate link regardless of the PVC on which the traffic occurred.
4. Rank Top Stats By - Selection determines whether the Top IP Traffic collection
will be ranked by IP traffic with the highest Packet counts or IP traffic with the
highest Octet counts.
Commands:
Help [?] - Advances to “Help” for PVC Performance Configuration screen.
Save [SA] - Saves parameters and returns to System View screen.
Cancel [X] - Returns to System View screen without saving changes.
Save the Protocol Monitor Configuration changes when they are all set correctly by en-
tering “SA” followed by ENTER. Also returns the user to the System View screen.
Configuration
Completed
The basic NetPath 100 initial configuration is now completed.
If the unit is not optionally equipped, such as with an ISDN Adapter, or the option fea-
ture will not be used at this time, then proceed to the next section of this manual, Test
Installation.
If the NetPath 100 is equipped with an option module, proceed to Section 6, “Options,”
of this manual for installation and configuration instructions for that option.
