6 Options
980-001-0210K
NetPath 100 User’s Manual - Installation Guide
6-21
November 2000
Line n / Bn: Displays current status of each ISDN line and B Channel.
Status states are:
ISDN Adp Fault - The ISDN hardware has failed.
ISDN Line Failure - The ISDN line of this B-Channel is faulty.
ISDN SPID Failure - An invalid or incorrect SPID has been entered for
this B-Channel.
B1 SPID Failure - A B2-Channel cannot operate due to a SPID failure
on its associated B1-Channel.
LoopUp - LoopUp connection in place.
Connecting - Connection is being established.
Online - Connection in place.
Ready-xxx(-mmmm) - Default state if not disabled and no failure exists.
“xxx” indicates the latest Cause Code (See NOTE below.)
“mmmm” indicates the last connection status, see Table 6-5
for codes (applies to ML-PPP inverse multiplexing ONLY.)
Failed-xxx(-mmmm) - Retry attempts exhausted.
“xxx” indicates the latest Cause Code (See Note below.)
“mmmm” indicates the last connection status, see Table 6-5
for codes (applies to ML-PPP inverse multiplexing ONLY.)
NOTE: An ISDN switch will return a “Cause Code” indicating a status for the latest
connection attempt. A “Ready” or “Failed” status and the latest returned code
number are displayed in this field for each configured B-Channel. A list of
codes and causes are shown in Table 6-4.
Commands
Help [?] - Advances to “Help” for ISDN Status / Test screen.
Close [X] - Returns to System View screen without saving changes.
AutoUpdate [AU] - Causes the status fields on the current screen displayed to refresh
automatically (approximately every five seconds).
ViewStats [VS] - Advances to ISDN Statistics Screen.
