6 Options
6-10
NetPath 100 User’s Manual - Installation Guide
980-001-0210K
November
2000
ISDN Adapter
Configuration
The ISDN Adapter Configuration screen allows you to view and alter parameters for
the ISDN Adapter related operations.
To proceed to ISDN Adapter Configuration, from the System View Screen, type “IC”
and press ENTER.
The ISDN Adapter Configuration screen is shown in Figure 6-5.
Figure 6-5 ISDN Adapter Configuration Screen
ISDN S/W: Software revision number currently operating the ISDN Adapter module.
Switch Type - Selects the Protocol to match the ISDN Switch being used by the Telco
providing the ISDN service.
Bkp: Parameters to be selected for Backup operation.
Rate - Select the data rate to be used when establishing Backup ISDN
connections.
IMUX - Select the method of inverse multiplexing to be used for Backup calls.
Bond/M1 - Selects Bonding Mode 1 Protocol to bond up to eight B-
Channels.
Dwnspd - “Disable” will not allow a multi-B Channel backup connection to be
completed if only a portion of the B Channels succeed.
Default is “Enable” (downspeeding allowed).
************************** ISDN Adapter Configuration **************************
Name: F@43802 ISDN S/W: 01.29
Switch Type [S=]
Bkp: Rate [R1=] IMUX [M1=] Dwnspd [D1=] >>1) National/NI-1<<
>>1) Nx56k<< >>1) Bond/M1<< >>1) Enable<< 2) 5ESS-PtoP/NonInit
2) Nx64k 2) Disable 3) 5ESS-MultiP/Init
4) DMS100
Dmd: Rate [R2=] IMUX [M2=] Dwnspd [D2=] TxD Clk [T=] Control [C=]
>>1) Nx56k<< >>1) Bond/M1<< >>1) Enable<< >>1) DCE<< >>1) DTR<<
2) Nx64k 2) ML PPP 2) Disable 2) DTE 2) V.25
-Channel- ----------- SPID ---------- ------- Directory # -------
Line1 B1 [P1=]: [N1=]:
B2 [P2=]: [N2=]:
Line2 B1 [P3=]: [N3=]:
B2 [P4=]: [N4=]:
Line3 B1 [P5=]: [N5=]:
B2 [P6=]: [N6=]:
Line4 B1 [P7=]: [N7=]:
B2 [P8=]: [N8=]:
Help[?] Save[SA] Cancel[X]
>
