Appendix
980-001-0210K
NetPath 100 User’s Manual - Installation Guide
A-3
November 2000
ISDN Backup
ISDN Backup shows the highest priority ISDN Backup related fault, test or status cur-
rently detected. This is displayed on the System View and ISDN Status / Test screens.
Table A-3 ISDN (Backup, User Circuit)
Display
Description
ISDN Adapt Fault
The ISDN hardware has failed (backup cannot be accomplished)
Primary On Line
Backup connection in place using Primary Dials.
Secondary On Line
Backup connection in place using Secondary Dials.
Primary Dwn Spd
Backup connection in place using Primary Dials, but with fewer ISDN connections
than configured for.
Secondary Dwn Spd
Backup connection in place using Secondary Dials, but with fewer ISDN connections
than configured for.
Connecting
Connection is being established.
Failed
Retry attempts exhausted.
ISDN Line Failure
The ISDN line of at least one B-Channel is faulty (backup may not be possible).
ISDN SPID Failure
An invalid or incorrect SPID has been entered for at least one B-Channel (backup may
not be possible).
B1 SPID Failure
A B2-Channel cannot operate due to a SPID failure on its associated B1-Channel.
Service Disabled
“Service Disable” has been selected on the “ISDN Status / Test” screen.
Time Disabled
“Time Disable” has been selected on the “ISDN Status / Test” screen.
Loop Up
LoopUp connection in place on any assigned B-Channel.
Armed
Default state if not disabled and no failure exists.
