4 Operation
4-10
NetPath 100 User’s Manual - Installation Guide
980-001-0210K
November
2000
Parameter
Setting
Upon successful login, the System View screen is displayed.
The System View screen presents an overview of the system and provides access to
configuration, test, and other status screens.
The System View screen is shown in Figure 4-6.
Figure 4-6 System View Screen
The System View screen fields are as follows:
Name - Device ID defined in the Unit Configuration.
Location - Physical location (city and state) of unit.
Contact - Contact person and phone number contained in the Unit Configuration.
Base S/W - Software revision number currently operating the unit.
The first two-digit number indicates the unit’s feature set, the second indicates
the base software revision, and the last indicates minor revision level. An Alpha
character at the end of this field indicates the option type installed, if any.
S/N - Serial Number of Unit.
System
Test / Fault: Highest priority Test or Fault causing disruption of the data path.
States are:
Improper Aux2 Cable - Improper cable detected at Aux 2 Port. Remove cable and
contact Technical Support immediately.
NVM Failure - Unit has detected NVM failure and latest configuration may
not have been saved. Contact Technical Support immediately.
Additional Tests, CSU and Frame Relay faults are displayed here.
See Device Status / Test screen in Section 5 of this manual for details.
*********************** FrameSaver NP 100 - System View ************************
Name: F@43802 Base S/W: 09.01.95
Location: Fair Lawn, N.J. S/N: 001812
Contact: J. Jones
System High Speed Interface Status
Test/Fault: DTR: On
RTS: On
Power: On
Modem Status Interface: ITU-V35
Fault:
Connection:
Aux Port Status
Aux1 DTR: Off
Aux2 DTR: Off
DevConfig[DC] CsuConfig[CC] FrameConfig[FC] PvcConfig[PC] MonConfig[MC]
DevTest[DT] CsuStats[CS] FrameStats[FS] PvcStats[PS] MonStats[MS]
SnmpConfig[SC] TrapConfig[TC]
Help[?] Logout[LO] AutoUpdate[AU] TopStats[TS]
>
