Appendix
980-001-0210K
NetPath 100 User’s Manual - Installation Guide
A-5
November 2000
Line
n
/B
n
(ISDN)
Line n/Bn shows the highest priority fault, test or status currently detected for each
ISDN Line (1-4) and B-Channel (1-2). This is displayed on the ISDN Status / Test
screen.
NOTE: An ISDN switch will return a “Cause Code” indicating a status for the latest
connection attempt. A “Ready” or “Failed” status and the latest returned code
number are displayed in this field for each configured B-Channel. A list of
codes and causes are shown in Table A-6 on the following page.
Table A-5 Line n/Bn (ISDN)
Display
Description
ISDN Adapt Fault
The ISDN hardware has failed.
ISDN Line Failure
The ISDN line of this B-Channel is faulty.
ISDN SPID Failure
An invalid or incorrect SPID has been entered for this B-Channel.
B1 SPID Failure
A B2-Channel cannot operate due to a SPID failure on its associated B1-Channel.
LoopUp
LoopUp connection in place.
Connecting
Connection is being established.
Online
Connection in place.
Online-mmmm
(Applies to MLPPP
only)
Connection in place.
“mmmm” indicates the last connection status, see Table A-7
Failed-xxx
Retry attempts exhausted.
“xxx” indicates the latest Cause Code (See Note below.)
Failed-xxx-mmmm
(Applies to MLPPP
only)
Retry attempts exhausted.
“xxx” indicates the latest Cause Code (See Note below.)
“mmmm” indicates the last connection status, see Table A-7 for codes.
Ready-xxx
Default state if not disabled and no failure exists.
“xxx” indicates the latest Cause Code (See NOTE below.)
Ready-xxx-mmmm
(Applies to MLPPP
only)
Default state if not disabled and no failure exists.
“xxx” indicates the latest Cause Code (See NOTE below.)
“mmmm” indicates the last connection status, see Table A-7 for codes.
