6 Options
6-12
NetPath 100 User’s Manual - Installation Guide
980-001-0210K
November
2000
Backup / On-
Demand
Configuration
The Backup / On-Demand Configuration screen allows the user to view and alter pa-
rameters for the ISDN Backup or On-Demand operations.
To proceed to Backup/On-Demand Configuration, from the System View Screen, type
“BC” and press ENTER.
The Backup / On-Demand Configuration screen is shown in Figure 6-6.
Figure 6-6 Backup / ON-Demand Configuration Screen
Backup: Establishes an ISDN data link and switches the Base module Frame Manager
from the T1 link onto the ISDN link(s). Backup is triggered by a T1 outage, loss of
Network or may be operator-initiated. Configuration items are:
Bkp # n WAN IP Add - Sets the IP Address for management access while the
unit is on backup. Bkp # 1 WAN IP Add is used for Primary Dial # 1, and Bkp #
2 WAN IP Add is used for Secondary Dial # 2.
Bkp Activate Delay - Sets the time to wait after a T1 outage or loss of Network
is detected, before a backup attempt is initiated. Valid range is from 0 to 240 min-
utes.
NOTE: If the original initiating condition clears for a duration of at least one
minute and the Bkp Activate Delay has not yet expired, the backup will be
aborted.
Bkp Rtry Count - Sets the number of retry attempts to establish a backup connec-
tion on each set of phone #’s (Primary then Secondary). Valid range is from 1 to 4.
Bkp Rtry Holdoff - Defines the delay between each retry attempt. Valid range is
from 1 to 15 minutes.
*********************** Backup / On-Demand Configuration ***********************
Name: F@43802 Bkp Downspeed Minimum [M1=#]: 1
Bkp#1 WAN IP Add [I1=]: 0.0.0.0 Dmd Downspeed Minimum [M2=#]: 1
Bkp#2 WAN IP Add [I2=]: 0.0.0.0 1 thru 8 channels
Bkp Activate Delay [A=#]: 1 Dmd LMI Holdoff [N=#]: 0
0 thru 240 mins 0 thru 15 minutes
Bkp Rtry Count [C1=#]: 1 Learn IP Add [L=] Dmd Rtry Count [C2=#]: 1
1 thru 4 >>1) Each Connect<< 1 thru 4
Bkp Rtry Holdoff [H1=#]: 2 2) When Zero Dmd Rtry Holdoff [H2=#]: 2
1 thru 15 minutes 1 thru 15 minutes
Assign to Backup [B=]/Demand [D=] ([B=m,n,..r] and/or [B=m-n] for multiples)
-Channel- -Assign- ----- Primary Dial #1 ---- ---- Secondary Dial #2 ---
>>1) Line1 B1 Backup<< [P1=]: [S1=]:
>>2) B2 Backup<< [P2=]: [S2=]:
>>3) Line2 B1 Backup<< [P3=]: [S3=]:
>>4) B2 Backup<< [P4=]: [S4=]:
>>5) Line3 B1 Demand<< [P5=]: [S5=]:
>>6) B2 Demand<< [P6=]: [S6=]:
7) Line4 B1 [P7=]: [S7=]:
8) B2 [P8=]: [S8=]:
Help[?] Save[SA] Cancel[X]
>
