112
EVO Installation Guide
C.0.21 PGM Deactivation Mode
S
ECTION
[006]
: O
PTION
[2]
C.0.22 PGM Base Time
S
ECTION
[006]
: O
PTION
[3]
C.0.23 PGM Override
S
ECTION
[006]
: O
PTION
[4]
When the PGM override is enabled, the keypad's on-board PGM will ignore PGM Activation Events
(
section
C.0.25
)
,
PGM Deactivation Events
(
section C.0.26
)
,
and
PGM Timers
(
section C.0.24
). It will remain in its
normal state until the PGM Override is disabled. This option may be used to test the PGM connections.
C.0.24 PGM Timer
S
ECTION
[008]
The value programmed in section
[008]
represents how long the PGM will remain in its opposite state after
being activated. To program the timer, enter a 3-digit decimal value (000 to 255) in section
[008]
. Default: 5
seconds
.
C.0.25 PGM Activation Event
S
ECTIONS
[009]
TO
[012]
Enter the sections that correspond to the Event Group, Feature Group, Start # and End # of the PGM and enter
the required data.
C.0.26 PGM Deactivation Event
S
ECTIONS
[013]
TO
[016]
If the PGM Deactivation Option is set to follow the PGM Deactivation event, the PGM will return to its normal
state when the event programmed in sections
[013]
to [016] occurs.
Enter the sections that correspond to the Event Group, Feature Group, Start # and End # of the PGM and enter
the required data.
K641R Programming
C.0.27 Partition Assignment
S
ECTION
[001]: O
PTIONS
[1]
TO
[8]
To assign the keypad to a partition, enable the option that corresponds to the desired partition.
By default,
partitions 1 to 8 are enabled.
C.0.28 Display Access Code Entry
S
ECTION
[003]: O
PTION
[1]
Option
[1]
OFF=Digits are replaced by a “*“(default)
Option
[1]
ON=Access Code digits will be displayed
Option
[2]
OFF =
Deactivates on PGM Deactivation Event (default)
Option
[2]
ON =
PGM will deactivate according to the PGM Timer
Option
[3]
OFF =
PGM Base Time is 1 second (default)
Option
[3]
ON =
PGM Base Time is 1 minute
Option
[4]
OFF =
PGM Override disabled (default)
Option
[4]
ON =
PGM Override enabled
Event Group
Feature Group
Start #
End #
PGM
[009]
[010]
[011]
[012]
Event Group
Feature Group
Start #
End #
PGM
[013]
[014]
[015]
[016]
Summary of Contents for Digiplex EVO192
