Paradox Digiplex EVO192, Installation Manual

Page: 30 / 147

30 EVO Installation Guide
3.5 Module Programming Mode
To program a Module with a keypad, enter Module Programming Mode :
The control panel will redirect all programming to the selected module. To exit the Module Programming
Mode, press the
[
CLEAR
]
key on LCD keypads, or the right action key ( Exit ) on Grafica keypads.
1. Press and hold the
[0]
key.
2. Key in the
[
INSTALLER CODE
]
(default = 000000 ).
3. Key in section
[4003] .
4. Key in 8-digit
[
SERIAL NUMBER
]
of the module.
5. Key in 3-digit
[
SECTION
]
and required
[
DATA
] .
Refer to the
“Module Programming Guide” for details.