1
Standard Features
The system has the following standard features:
• (2) 1-button remote controls
• Two Built-in relays for starter and/or fuel system
disable
• LED indicator
• Valet switch
• Passive or active arming
• Ignition trigger
Optional Features
The system has many optional features that may require
additional parts and/or labor.
• Remote keyless entry (Door lock/unlock)
• Optional third circuit defeat output
• Illuminated entry
• Horn honk
• Anti-carjacking
• Selectable parking light/horn output
Adding or Deleting Remote Controls
Follow the steps below to code a replacement trans-
mitter into the system (maximum of 4). If there are
less than 4 transmitters, code the last transmitter
multiple times to fill all 4 transmitter slots and force
any lost or stolen transmitters out of the system.
To enter Code Learning Mode:
1. Turn ignition key on, off, on, off, and leave on
within 5 seconds.
• The LED will will flash 3 times.
2. Press and hold the valet switch for 2 seconds.
• The LED will will flash 5 times.
3. Release the valet switch.
4. Program all desired remotes by pressing the
button on each of the transmitters.
• The LED will will flash after the system has
learned each transmitter.
5. Turn off the ignition.
Passive Vehicle Immobilizer System
Owner / Installation Manual
Wiring Diagram
