© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
WMSTR-WR-P0x_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
• ADM loop technology with
System Sensor/200 protocol
• Long lifetime of strobe due to the use
of LEDs
• Low power consumption
• Versions with or without integrated
dual-isolator available
• Various base types available –
IP24, IP44, IP65
Specifi cations
Operating voltage
Supply through loop voltage
Flash frequency
1Hz
Ambient temperature
-25°C to +70°C
Dimensions ø × H
112 × 37 (mm) (incl. base LPBW)
Weight
80g
Colour
red
The loop powered strobe is fi tted into a round, red plas-
tic case. It is powered and actuated as a module via the
ADM loop with System Sensor/200 protocol.
The address of the strobe is selected with two decadic
rotary switches located at the bottom of the device.
The strobe is designed for indoor or outdoor wall moun-
ting. For this purpose a special base is needed. Various
base types for protection classes IP24, IP44 or IP65
are available, depending on the application. An optional
mounting plate can be supplied for surface mounted
cabling.
The strobe is available in two different versions: With or
without integrated dual-isolator module.
