manualshive.com logo in svg

Pantone X-Rite eXact 2, User Manual

The Pantone X-Rite eXact 2 User Manual is an essential resource for maximizing the functionality of your device. This comprehensive manual covers all features and provides step-by-step instructions for optimal performance. Download the free manual from our website and unlock the full potential of your Pantone X-Rite eXact 2.

Share
Download
background image

X - R i t e   e X a c t   2  

2

 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de 
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de 
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage 
est susceptible d'en compromettre le fonctionnement. 
Note: Changes or modifications not expressively approved by the party responsible for compliance could void 
the user's authority to operate the equipment.  

RF Exposure 

This product has been tested to ensure conformance to KDB 447498 General RF Exposure Guidance and 
complies with limits for human exposure to Radio Frequency (RF) fields adopted by the Federal 
Communications Commission (FCC) and RSS-102 - Radio Frequency (RF) Exposure Compliance of Radio 
communication Apparatus (All Frequency Bands) per Canada ISED, and EN 50566 for EU hand-held use. 
Nevertheless, the device shall be used in such a manner that the potential for human contact during Wi-Fi 
transmission is minimized. 
Ce produit a été testé pour garantir la conformité aux directives générales d'exposition aux radiofréquences 
KDB 447498 et est conforme aux limites d'exposition humaine aux champs de radiofréquence (RF) adoptées 
par la Federal Communications Commission (FCC) et RSS-102 - Conformité à l'exposition aux radiofréquences 
(RF) d'appareils de communication radio (toutes les bandes de fréquences) selon ISDE Canada pour une 
utilisation portative. Néanmoins, l'appareil doit être utilisé de manière à minimiser le potentiel de contact humain 
pendant la transmission Wi-Fi. 

Japanese Ministry of Internal Affairs and Communications (MIC)

 

Contains  

SRRC (State Radio Regulation of China) Certification 

ITE Device: Contains CMIIT ID: 2018DJ1313 

Korea 

 

R

‐

R

‐

XRT

‐

EXACT2,

 

 

R

‐

R

‐

XRT

‐

EXACT2DOCK

 

Equipment Information 

Use of this equipment in a manner other than that specified by X-Rite, Incorporated may compromise 
design integrity and become unsafe. 

WARNING

: This instrument is not for use in explosive environments. 

ADVERTENCIA

 – NO use este aparato en los ambientes explosivos. 

AVVERTIMENTO

 – NON usare questo apparecchio in ambienti esplosivi. 

WARNUNG

: Das Gerät darf in einer explosiven Umgebung NICHT verwendet werden. 

AVERTISSEMENT

: Cet instrument ne doit pas être utilisé dans un environnement explosif. 

Instructions for disposal: Please dispose of Waste Electrical and Electronic Equipment (WEEE) at 
designated collection points for the recycling of such equipment. 

If this product is used in a manner not specified by the instruction, the safety protection provided by the device 
may be impaired or become inoperable. 
Unauthorized dismantling of the 

eXact 2

 will void all warranty claims. 

CAUTION

: Risk of explosion if battery is replaced by an incorrect type. Replace only with X-Rite part number 

SE15-48, selfprotected rechargeable lithium-ion battery pack. 

Summary of Contents for X-Rite eXact 2








































































Reviews:

No comments

Related manuals for X-Rite eXact 2

Kawai CN35 Owner'S Manual preview
CN35
Brand: Kawai Pages: 142
Kawai CN35 Setting Manual preview
CN35
Brand: Kawai Pages: 10
C-LOGIC 85 Instruction Manual preview
85
Brand: C-LOGIC Pages: 4
XS Scuba MultiMax Service Manual preview
MultiMax
Brand: XS Scuba Pages: 24
VeEX MPA User Manual preview
MPA
Brand: VeEX Pages: 842
Unitech UT-1405 Instruction Manual preview
UT-1405
Brand: Unitech Pages: 18
Aqua Lung PHODS Technical Manual preview
PHODS
Brand: Aqua Lung Pages: 24
Elcontrol Vip 396 485 Addition To The User Manual preview
Vip 396 485
Brand: Elcontrol Pages: 7
Ecodhome 01335-1800-00 Installation Manual preview
01335-1800-00
Brand: Ecodhome Pages: 12
Vanguard Instruments TRM-20 User Manual preview
TRM-20
Brand: Vanguard Instruments Pages: 85
Velleman DCM97K User Manual preview
DCM97K
Brand: Velleman Pages: 13
A&D LC-4101 Series Instruction Manual preview
LC-4101 Series
Brand: A&D Pages: 2
Bulteh 2000 EKOMILK User Manual preview
EKOMILK
Brand: Bulteh 2000 Pages: 80
BIOS dry-cal dc-lite User Manual preview
dry-cal dc-lite
Brand: BIOS Pages: 10
wtw pH 3310 IDS Operating Manual preview
pH 3310 IDS
Brand: wtw Pages: 72
Hall Research Technologies PGA-VHD User Manual preview
PGA-VHD
Brand: Hall Research Technologies Pages: 24
Draminski 29356 Manual preview
29356
Brand: Draminski Pages: 22
Kedida CT-6020 Instruction Manual preview
CT-6020
Brand: Kedida Pages: 4

Brands by name

Popular brands

Load more brands