Pantone X-Rite eXact 2, User Manual

Page: 47 / 71

X - R i t e e X a c t 2
45
NOTE : If the CMY 100 patch is not measured and the job uses paper compensation, the job is running in G7
Static mode. If the CMY 100 patch is measured, the job is running in G7 Dynamic mode.
G7 Gray Balance
The G7 job function provides w ∆ L (Weighted Delta L) and w ∆ Ch (Weighted Delta Ch) along with the black
channel density. An indication is provided for per-channel density adjustments to get closer to the gray balance
standard.
G7, PSO and Japan Color
These jobs behave the same as the standard job, with the following differences.
The settings of these jobs use the definition of its process specifications. These jobs do not get preset with the
regional settings. However, the settings can be changed manually by the user.
The following functions are preset and cannot be changed.
G7 Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*a*b*
Gray Balance QC: Display is preset to
Δ L*, Δ E*, Δ Ch
TVI Table Setting: Spread is preset to All
PSO Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*C*h°
Gray Balance QC: Display is preset to
Δ L*, Δ a*, Δ b*, Δ E*
TVI Table Setting: Spread is preset to Middle
Japan Color Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*C*h°
Gray Balance QC: Display is preset to
Δ L*, Δ a*, Δ b*, Δ E*
TVI Table Setting: Spread is preset to Middle
Select a Job
The function is used to select a job to open in the corresponding tool.
1. Select Jobs (1) from the eXact 2 menu.
2. Tap the search field (2), enter the job name using the virtual keyboard
3. Tap Enter or swipe the screen until you see the desired job folder.
NOTE : You can also tap Filter and select the job sort option.
4. Swipe the screen until you see the desired job folder.
5. Tap the job (3). The selected job (4) opens in the corresponding tool.
6. Refer to the Density section for information on running the job in the Density tool.
7. Refer to the Scanning section for information on how to scan a color bar.
(2)
(4)
(3)
(1)