Panasonic Panafax DX-2000, User Manual

Page: 19 / 224

17
For the total system to work properly via LAN, certain information and additional parameters must be set. Please
contact your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required information. After
its returned, transfer the information to the back side of the front cover for future reference and
troubleshooting.
(see Note 1) (see Note 2) (see Note 3) (see Note 4)
User Information
Company Name
Address
Dept.
City State Zip Code
Tel. No. Fax No.
Internet Parameters (See page 41 to 45)
(1) IP Address:
(2) Subnet Mask:
(3) *SMTP Server Name: or *SMTP Server IP Address:
(4) Default Router IP Address:
(5) Email Address:
(6) DNS Server IP Address:
(7) POP Server Name: or *POP Server IP Address:
(8) POP User Name:
(9) POP Password:
(10) Host Name:
(11) Default Subject:
(12) Default Domain:
(13) Remote Password:
(14) Relay XMT Password:
(15) Manager’s Email Address:
(16) Acceptable Domain Name(s) for Relay Transmission:
1. 6.
2. 7.
3. 8.
4. 9.
5. 10.
1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP
Server Names (items 3 and 7 above). If the DNS Server is not available, change the Fax Parameter No. 161 (DNS
SERVER) to "1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of the DX-2000 can be obtained from the 2nd page of the Fax Parameter List printout,
by pressing .
4. Dynamic Host Configuration Protocol (DHCP) is not supported.
FUNCTION
6 4 SET
Pre Installation Information
Note:
1
Continued on the next page...