Panasonic Panafax DX-2000 User Manual Download Page 223

Page: 223 / 224

START

ABBR

UICK

UIDE DX-2000

How to Set Documents.

Set the documents face down
and adjust the document guides.

You can set the documents on the ADF (

utomatic

ocument

eeder) up to 50 pages* at one time.

* : (Based on 20 lbs (0.0048”) weight Letter sizes document)

The display message is as shown below when the
documents are set properly.

How to Send Using Manual Dialing.

How to Send Using One-Touch/Abbreviated Key.

Set the documents
face down.

Enter the telephone number
or press the

key to enter an email address.

INTERNET

The document is
stored in memory.
Then, your machine
starts dialing the
number or sending
via LAN.

Set the documents
face down.

The document is
stored in memory.
Then, your machine
starts dialing the
number or sending
via LAN.

ENTER STATION(S)

THEN PRESS START 00%

Enter a 3-digit
code (000 to 999).

START

Summary of Contents for Panafax DX-2000

































































































































































































































Search results

Summary of Contents for Panafax DX-2000

Reviews:

Related manuals for Panafax DX-2000

Brands by name

Popular brands

Panasonic Panafax DX-2000, User Manual

Search results

Summary of Contents for Panafax DX-2000

Reviews:

Related manuals for Panafax DX-2000

Brands by name

Popular brands