Panasonic LB-DH8 series, Operator'S Manual

Page: 135 / 148

135
Others Errors and warnings
Code
Email
notification
SNMP trap
notification
Action to be taken
W1122
s s
The command cannot be executed because a magazine is loaded
in the drive system.
)
Use an application to remove the magazine from the drive
system.
W2000
± ±
Performance of the changer mechanism operation in the changer
unit has deteriorated.
)
The maintenance of the changer mechanism or peripheral circuit
is recommended.
W2001
W2003
± ±
Performance of the changer unit’s circuit board has deteriorated.
)
The maintenance of the circuit board or peripheral circuit is
recommended.
W2010
± ±
The detected number of times of magazine loading is nearly equal
to the prescribed value.
)
Check the number of times of magazine loading by control panel
or Web interface. We recommend copying the contents of the
magazine to another magazine. (
 42, 78)
W2011
± ±
The verify function has detected that the writing quality is not
suitable for storage.
)
Check the status of the magazine through the Web interface or
the S.M.A.R.T. information in the log. We recommend copying the
contents of the magazine to another magazine. (
 84, 110)
W2020
± ±
In spite of a failure, the magazine move operation continued
normally after a retry.
)
If a warning message is displayed again, draw the magazine
drawer including the magazine in question to check if all
magazines have been set correctly.
W2030
s s
An incompatible magazine has been set.
)
Take out the magazine.
W2031
± ±
1D/2D code which is out-of-specification is attached.
)
Attach the correct 1D/2D code.
W2040
s s
The specified processing cannot be performed because the
magazine drawer is open.
)
Close the magazine drawer and retry the processing.
W2050
s s
Failed to communicate with the drive system.
)
Replacing the drive system is recommended.
W2051
W2120
s s
The specified processing cannot be performed because an
application inhibits the disc from being taken out of the drive system.
)
Retry the processing after the application allows the disc to be
taken out of the drive system.
W2130
s s
The specified processing cannot be performed because an
application inhibits the magazine drawer from being unlocked.
)
Retry the processing after the application allows the magazine
drawer to be unlocked.