27
Operations
Operation method
Set the following items as required.
The following two methods can be used to set and maintain the unit.
`
Operating the control panel on the front of the unit (
Operate the control panel to check the states of the unit, make various network settings, make various settings
for opening and closing the magazine drawer, and operate the magazine drawer.
`
Operating the Web interface (
Access the unit with the Web browser to check the state of the unit, make various network settings, make various
settings for opening and closing the magazine drawer, and operate the magazine drawer.
The unit operates according to SCSI commands via the host interface, and it operates according to the following
commands.
`
Drive system control: MMC command
`
Changer unit control: SMC command
The unit can be operated by an application running on a server connected to the unit.
The DATA ARCHIVER Manager and storage control application are used to control the changer unit and read it from
the magazine or write data onto a magazine.
For information on how to use, refer to the application manual.
Operations for setting and maintaining the unit
Note
When settings of the unit have been changed, it is recommended that the settings be saved through the control
panel or Web interface. (
Operations by a application
