Panasonic LB-DH8 series Operator'S Manual Download Page 75

Page: 75 / 148

Operations

Web interface operation

Changer <Monitor>

Indicates information concerning the changer unit of the unit.

* Indicates only when “Status” is set to “Ready”.

Status

Indicates the status of the changer unit in the unit.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Additional Information*

Indicates additional information of “Status”.

Scanning: Inventory is being executed.
Transport: A magazine is being moved.
Drawer Open(Left)/Drawer Open(Right): The indicated magazine drawer is
open.

Drawer*

Indicates authorization status for unlocking the left and right magazine drawers.

Prevent by host: Unlocking the magazine drawer is prohibited by the application.

≥

A blank state indicates that the magazine drawer can be unlocked.

Power On Time

Indicates the time of power supply to the changer unit.

Move Count

Indicates the number of times of the magazine move operation.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands