manualshive.com logo in svg

Panasonic LB-DH8 series, Operator'S Manual, Page: 89 / 148

Share
Download
Panasonic LB-DH8 series Operator'S Manual Download Page 89

89

Operations

Web interface operation

Support Contact <Configure>

Set your support service provider contact information.

≥

Change the settings, then select “Submit” to accept the change.

Save/Restore <Configure>

Saves and restores settings and initialize them to initial ones.

Support Name

Sets your support service provider name.

≥

A maximum of 64 alphameric characters can be input.

Support Phone

Sets the phone number of your support service provider.

≥

A maximum of 32 characters can be input.

Support Email

Sets an email address of your support service provider.

≥

A maximum of 255 characters can be input.

Restore Defaults

Discards the unit settings and initializes them to initial ones (factory settings).

≥

Selecting “Restore” will execute the operation.

Save Configuration To 
File

Downloads the settings to the unit.

≥

Selecting “Save” will execute the operation.

Restore Configuration 
From File

Uploads the settings from the unit.

≥

Specifies the file, then select “Restore” to update the software.

Summary of Contents for LB-DH8 series





















































































































































Reviews:

No comments