Panasonic LB-DH8 series Operator'S Manual Download Page 84

Page: 84 / 148

Operations

Web interface operation

View Logs <Monitor>

Indicates the various logs of the unit.

≥

Select or enter the item and then select the “View” button to view.

S.M.A.R.T. <Monitor>

Indicates a replacement recommended component or a replacement mandatory component, if any.

Good: Normal.
Warning: Useful life is about to expire. Replacement is recommended.
Critical: Operation is no longer possible due to malfunction or other causes. Replacement is mandatory.

Log Type

Selects the log type to be displayed.

Standard Trace: View the information history.
Warning Trace: View the warning history.
Error Trace: View the error history.

Total Number Of
Entries

Indicates the total number of entries for the selected log.

Start Entry

Input the first entry to display.

Number Of The Line

Input the number of entries per page to display.

Flash Memory

Indicates information for the flash memory in the unit.

FAN

Indicates combined information for the regular fan and the redundant fan.

Changer

Indicates information for the changer unit.

Drive

Indicates information for the drive system.

Magazine

Indicates information for magazines.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Brands by name

Popular brands