manualshive.com logo in svg

Panasonic LB-DH8 series, Operator'S Manual, Page: 40 / 148

Share
Download
Panasonic LB-DH8 series Operator'S Manual Download Page 40

40

Operations

Operating the control panel

Drive <Monitor>

Indicates information concerning the drive system of the unit.

≥

Select a module. (

30)

(To display the module selection screen again, select 

A

.)

Status

Indicates the state of the drive system of the unit.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Add Info

Indicates additional information of “Status” (only when “Status” is set to “Ready”).

No Disc: Discs are not in.
DiscIn: Discs are in.
DiscIn W Protect: Discs are in, but they are write-protected.
DiscIn R/W NG: Discs are in, but a write/read error has occurred.

Medium Removal

Indicates the permission status for ejecting media from the drive system.

prevented by host: The application prohibits the ejection of the disk from the 
drive.

≥

The disk can be ejected if this shows blank.

Power On Time

Indicates the time of power supply to the drive system.

Temperature

Indicates an internal temperature of the drive system.

RAID / Encrypt

Indicates the RAID level setting and the enable/disable setting on writing data 
encryption.

RAID 0: RAID 0 is set.
RAID 5: RAID 5 is set.
RAID 6: RAID 6 is set.

≥

When there are no discs or if there is an unformatted disc inserted, “---” is 
displayed.

≥

For details, refer to “RAID functions” (

103) and “Encryption of write content” 

(

102).

Summary of Contents for LB-DH8 series





















































































































































Reviews:

No comments