138
Others
Appendix
Contacting your support service provider
For contact information of support service provider, contact the vendor.
Initializing settings upon transfer or disposal
To prevent information from being compromised, it is recommend that settings be initialized and the password be
changed.
≥
To initialize settings, select “Config”/“Configure”
“Save/Restore”
“Restore Defaults” in the control panel or the
Web interface.
≥
Since the password is not initialized, select “Config”/“Configure”
“System”
“Change Password” in the control
panel or the Web interface to change the password to the initial password (YrN9fQ>k) after executing “Restore
Defaults”.
≥
Write/read cache files in the unit are deleted when the unit is turned off.
≥
Please remove the products that are no longer used to prevent falls in case of an emergency.
Disclaimer
≥
Panasonic assumes no responsibility for any data loss and direct or indirect damage caused by the use,
malfunction, or any failure of the unit regardless of whether the unit is under warranty or not.
≥
It is a customer’s responsibility to manage data stored in DATA ARCHIVER Magazines. Make sure to check
whether the unit operates correctly before use, and back up important data as a precaution.
≥
Using a device that is not validated to work with the unit may cause performance to suffer. For information on
products that have been validated to work with the unit, contact the vendor. When a device that is not validated to
work with the unit is used, be fully aware of the fact that it may cause performance to suffer.
≥
If a password is compromised, it may be misused by a third party. It is a customer’s responsibility to manage a
password. Panasonic assumes no responsibility for password misuse.
