Panasonic LB-DH8 series Operator'S Manual Download Page 98

Page: 98 / 148

Operations

Web interface operation

Shutdown <Manage>

Shuts down and restarts the unit.

Update Software <Manage>

Updates the unit software. (



108)

Shutdown

Shuts down the unit.

≥

Terminate the application prior to this operation.

≥

The unit has a Wake-on-LAN capability. After this shutdown operation, the unit
can be started quickly through the use of an LAN port.

Reboot

Restarts the unit.

≥

To avoid an impact on the application, terminate it prior to this restart operation.

Current Software
Version

Indicates the current software version.

Software File

Updates the unit software.
Select “Choose File”, and select a file.

≥

Select the file, then select “Update” to update the software.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands