Panasonic LB-DH8 series Operator'S Manual Download Page 101

Page: 101 / 148

Operations

101

Various Functions

Wake-on-LAN function/Turn off function via LAN port

∫

Turn on power

To turn on the unit power, press the power button or connect the LAN port to the LAN and use the Wake-on-LAN
function.

≥

Some applications do not support the Wake-on-LAN function. For more information, refer to the application
manual.

∫

Turn off the unit

To turn off the unit, press the power button or use the control panel or Web interface; another way is for an
application that is connected to the LAN port on a LAN to turn off the unit.

≥

Some applications do not support turning off the unit via LAN. For more information, refer to the application
manual.

≥

When the unit is turned off, part of the circuit is still on.

∫

Operation of the unit when DC power is on

When DC power is supplied from an external power supply to the unit, you can configure unit operation by selecting
“Config”/“Configure”



“System”



“Startup Option” in the control panel or the Web interface. (



55, 88)

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands